PSI Matrix PP 806 Benutzerhandbuch Seite 200

Appendix E EPSON LQ ® Quick Reference
EPSON LQ 2550 and ESC/P Emulation
EPSON® is a registered trademark and EPSON Perfection ™ and Exceed Your Vision are trademarks of Seiko
Epson Corporation
This appendix contains basic information on the EPSON LQ 2550, ESC/P2, and EPSON Barcodes
Printer Emulation:
Characters used in control functions appear in monospaced type. Table 1 explains some of the
conventions used.
A pair of numbers separated by a slash ( / ) character indicates Column/Row notation. This notation
refers to the location of a character in a standard code table, such as ASCII. (example: 1/B = 1B is
the hex-code for Escape)
Spaces appear between characters in sequence for clarity; they are not part of the format.
At the end of this chapter you will find a listing of the EPSON LQ 2550, ESC/P2, and EPSON Barcodes
Emulation commands classified by Hex Code and a Hex- Decimal conversion table.
The following conventions are used in the command listings:
Table 1 Conventions
ESC Escape (1/B), introduces an escape sequence
Pn Numeric parameter, or number of units that specify a distance or quantity pertaining to
the escape sequence, control function or control string. Accepted values are 0...9999, may
be preceded by + or -. If the parameter is in normal notation like "200" the programming
in hex- code is according to a ASCII table. ("200" = 32,30,30 in hex). If the parameter must
be programmed in hex-code the notation is with a slash. (1/A = 1A in hex-code)
v1...vn A series of parameters pertaining to the escape sequence, control function or control
string.
SP Is standing for Space (hex 20)
(Native Command)
additional PSi command usable for the original emulation. Controls PSi specific printer
features that are not present in the original printer.
Appendix E-1