PSI Matrix PP 806 Benutzerhandbuch Seite 187

Escape Sequence
ESC I P1
ESC P P1
ESC R
ESC S P1
ESC T
ESC U P1
ESC W P1
ESC X P1 P2
ESC d P1 P2
ESC <
ESC ;
ESC [ P1 SP r
(Native Command)
Mnemonic Function
Select Character Mode
P1 = 0/0 : Draft, 10 cpi
P1 = 0/1 : Draft, Proportional
P1 = 0/2 : Courier, 10 cpi
P1 = 0/3 : Courier, Proportional
P1 = 0/8 : Draft, 12 cpi
P1 = 0/A : Courier, 12 cpi
P1 = 1/0 : Draft, 17 cpi
P1 = 1/2 : Courier, 17 cpi
Cancel / Select Proportional Printing
P1 = 0/0 or 0 : cancel Proportional
P1 = 0/1 or 1 : select Proportional
Restore Horizontal Tabs to Default
Select Superscript/Subscript
P1 = 0/0 or 0 : select Superscript
P1 = 0/1 or 1 : select Subscript
Cancel Superscript/Subscript
Cancel / Select Unidirectional Printing
P1 = 0/0 or 0 : cancel Unidirectional
P1 = 0/1 or 1 : select Unidirectional
Cancel / Select Double Width
P1 = 0/0 or 0 : cancel Double Width
P1 = 0/1 or 1 : select Double Width
Set Left and Right Margins
P1 : Left Margin
P2 : Right Margin
Set Relative Horizontal Dot Position
(P1 + P2 x 256)/120"
Home Position of Printhead (left margin)
Set Left Margin at Current Position
Select Print Quality LQ / NLQ
P1 = 0 : LQ
P1 = 1 : NLQ; this is only valid if the NLQ type
P1 = 2 : Draft
SPQ
P1 = 3 : HSD (High Speed Draft)
Note: The LQ / NLQ selection becomes
(Pn = 0/0...F/F)
(Pn = 0/0...F/F)
style is available.
active if a LQ-/NLQ-font is selected.
Draft / HSD becomes active if type
style DATA is selected
.
Appendix D-6