Maintenance And Cleaning - Conrad TE831X Bedienungsanleitung

17. Maintenance and cleaning

Servicing or repair work may only be carried out by a specialist/specialist workshop. There are no components on
the inside of the product which you need to maintenance. This is why you should never open it (apart from inserting
or changing the batteries as described in these operating instructions).
To clean the exterior of the weather station, a dry, soft and clean cloth is sufficient.

Do not press too hard on the display, as this may cause scratch marks or lead to faulty displays.
Dust on the weather station can be easily removed with the help of a long-haired, soft and clean brush and a vacuum
cleaner.
Use a slightly damp soft cloth (moistened with lukewarm water) to remove dirt from the outdoor sensors.
Never use aggressive cleaning agents, alcohol or other chemical solutions, as these may damage the
housing or even impair the function of the product.
Check the receptacle of the rain sensor sporadically. Despite the protective grid, small leave or dirt particles may clog
the opening on the bottom of the receptacle.
88