Viewing The Moon Phase Of The Past Or Next 39 Days; Turning The Thunderstorm Alarm On/Off; Viewing The Temperature Or Air Humidity Values Of The Past 24 Hours; Viewing The Air Pressure Values Of The Past 24 Hours - Conrad TE831X Bedienungsanleitung

 Viewing the moon phase of the past or next 39 days
• Briefly press the button "MEMORY" (3). The display window shows "+0 days" directly next to the weather symbol.
• With the button " " (6) or " " (7), you now view the moon phase for the next resp. last 39 days. The corresponding
moon symbol is indicated on the top left of the display (keep the button depressed longer for quick adjustment).
• Press the button "MEMORY" (3) to leave display mode (or do not press any button for approx. 5 seconds).
Full moon
 Turning the thunderstorm alarm on/off
In general, rapidly declining air pressure indicates a thunderstorm. In this case, the weather station can emit a signal.
• Briefly press the button "ALARM/CHART" (1). A thunderstorm icon appears on top of the display, and "ON" or
"OFF" appears in the display field for the air pressure.
• By repeatedly pressing the button "ALARM/CHART" (1), you can now activate ("ON") or deactivate ("OFF") the
thunderstorm alarm.
• Then wait a few seconds until the display of the current air pressure reappears. The setting is saved.
 Viewing the temperature or air humidity values of the past 24 hours
• Keep the button "ALARM/CHART" (1) depressed until a small thermometer symbol and a small house symbol with
"CH1" appear on the display on the right next to the progression display. The progression display now serves to
display the temperature progression measured by the temperature/air humidity sensor on channel 1 in the past 24
hours.
• Keep the button "ALARM/CHART" (1) depressed again until a small air humidity symbol and a small house symbol
with "CH1" appear on the display on the right next to the progression display. The progression display now serves
to display the air humidity progression measured by the temperature/air humidity sensor on channel 1 in the past
24 hours.
• If you press the button "ALARM/CHART" (1) once again for longer, the display switches back to the air pressure
progression.
 Viewing the air pressure values of the past 24 hours
• Briefly press the button "HISTORY" (2) repeatedly. The display now shows the average air pressure for each hour
in the past 24 hours (in case of missing values, e.g. because of a battery change or upon commissioning, line
appear ("- - - - . -") instead of a value.

By the way: the display of the air pressure progression in the past 24 hours using the "HISTORY" button
functions in all display modes.
New moon
69