Conrad TE831X Bedienungsanleitung Seite 64

• Afterwards, the radio tower symbol for DCF reception blinks on the display.
Bad reception signal

The detection of the DCF signal and its evaluation may take a few minutes. Once you have found a good
reception position, do not move the weather station any more during this time. Do not press any buttons
on the weather station.
Do not place the weather station next to electric/electronic devices; do not place it near cables, plugs
or metallic parts.
A bad reception can also be caused by, e.g. metallised insulated glass windows, reinforced concrete
constructions, coated special wallpaper or installation in basements.
For more information about DCF reception, see chapter 10.
• After the correct detection of the DCF signal and its evaluation, the time and the weekday appear on the display.
• If the measuring values of the temperature/air humidity sensor do not appear on the top right of the display yet, you
can start a manual search for all outdoor sensors.
For this purpose, keep the button " " (6) depressed until the symbol for the radio reception of the outdoor sensors
blinks on the top of the display.
The sensor search may take a few minutes.
Use the support base on the back of the weather station to install it in a suitable place.
For wall mounting (opening on the back of the weather station), simply pull off the base downwards.
Select an installation site that is not exposed to direct sunlight; otherwise you may receive wrong measuring values
for the temperature/air humidity. Also keep a sufficient distance to radiators.
To obtain a good radio reception, install the weather station as far away as possible from electric/electronic devices,
metal parts, cables or similar.
Protect valuable furniture surfaces with a suitable pad or similar to avoid scratches.
• This completes the commissioning of the weather station and the outdoor sensors.
64
Good reception signal