G) Basic Information Relevant To The Control Of Model Helicopters - Reely SKY Lama 6 Bedienungsanleitung

g) Basic Information Relevant to the Control of Model Helicopters

Before you fly your model, you should first familiarize yourself with the control possibilities open to you and thereby be
able to fly safely. The double rotor model helicopter is controlled via the two control sticks at the remote control
transmitter.
The following functions are available:
Pitch Function
With the pitch function you can control the flying height of the helicopter (see figure 10). For control, the left control
lever (also see figure 1, item 11) is used.
To that effect, the control lever can be moved forward and backward. Unlike with other control functions, the lever does
not keep springing back to the centre position. As the angles of attack of the rotor blades are not modifiable, setting the
flying height is effected via a common speed modification of the two rotors.
Pulling the lever towards you switches off the motors and the rotors stop. If you push the control lever forwards, the
rotors start up and increase their speed according to the position of the lever. When the lever reaches the centre
position, the helicopter should hover.
Figure 10
42