Switching On The Transmitter - Reely SKY Lama 6 Bedienungsanleitung

Only connect the charger when you have inserted rechargeable batteries (1.2 V/ cell) in the transmitter.
Never try to recharge batteries (1.5 V/cell) with a charger. There is a risk of fire and explosion!
In order to avoid damage to internal printed conductors and connections, please do not use quick chargers.
Since a protective diode is integrated in the transmitter, no chargers can be used that briefly interrupt the
charging current in order to measure the voltage of the rechargeable battery. In this case, remove the
rechargeable batteries from the transmitter for charging.
Attention!
The mains adapter included with the model is only suitable for connecting the LiPo charger (see figure 4). It
must not be used for charging of the transmitter rechargeable battery. The excess voltage could destroy the
battery, transmitter or charger. There is a direct danger of fire and explosion!
c) Switching on the Transmitter
When new batteries or freshly charged rechargeable batteries have been inserted, switch on the transmitter with the
function switch (see figure 1, item 6) for test purposes. The green LED display (see figure 1, item 8) indicates the
power supply of the transmitter.
If the power supply is not sufficient any more for faultless operation, the LED colour switches to orange. If the voltage
drops below 8.8 V, the LED flashes red. In this case, stop operation of your model as quickly as possible. To continue
operating the transmitter, recharge the batteries or insert new batteries.
Only connect the charger when the batteries have been discharged completely to avoid the memory effect in NiCd
batteries.
37