Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance
Always observe the following safety instructions before cleaning or servicing the power mixer:
Live components may be exposed if the covering is opened or components are removed.
The device must be disconnected from all power sources before carrying out any ser-
vicing or repair work.
Capacitors in the device may still be charged even after it has been disconnected from
all power sources.
Repair work must always be carried out by specialists familiar with the hazards involved
and with the relevant regulations.
If you have to replace fuses, ensure that you only use fuses of the same type and rated current
(see technical data).
You must not carry out your own repairs to fuses or bridge the fuse holder.
•
After disconnecting the device from the mains (disconnect mains cable!), use a suitable screwdriver
to carefully prise out the fuse holder on the mains connection (21) with the defective fuse.
•
Remove the defective fuse and replace it with a fuse of the same type.
•
Now reinsert the fuse holder with the new fuse into the mains connection (21).
•
Only now should you re-connect the device to the mains and operate it.
Otherwise, the device does not need servicing. The outside should only be cleaned with a soft, dry
cloth or a brush.
Never use caustic cleaning agents or chemical solutions as the surface of the housing could be
damaged.
Disposal
When the device has reached the end of its product lifespan, dispose of it in accordance
with the current statutory regulations.
26
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
