Introduction; Intended Use; Product Description - Reely Trimotor Tin Goose Bedienungsanleitung



1. Introduction

Dear customer!
Thank you for purchasing this product.
The product meets the requirements of the current European and national guidelines.
These operating instructions relate to this product. They contain important information on how to put the product into operation and
how to assemble it. Please take this into consideration when you pass the product on to third parties.
Please keep these instructions for further reference!
All company names and product designations contained herein are trademarks of the respective owners. All rights reserved.
In case of any technical inquiries, contact or consult:

Tel. no.: +49 9604 / 40 88 80
Fax. no.: +49 9604 / 40 88 48
E-mail: tkb@conrad.de
Mon. to Thur. 8.00am to 4.30pm
Fri. 8.00am to 2.00pm


2. Intended Use

This product is an electrically powered motorised model airplane which is wirelessly radio controlled via an infrared signal sent by the remote control system not
included in the delivery. The model is designed for outdoor use and should be flown under weak winds or in calm weather conditions only.
The product must not get damp or wet.
This product is not a toy and is not suitable for children and young people under the age of 14.
Take note of all the safety notes in these operating instructions! They contain important information regarding the handling of the product.
You are solely responsible for the safe operation of the model!


3. Product Description

The accurately modelled plane model "Trimotor Tin Goose" is a largely pre-assembled ARF model (ARF = "ALMOST READY TO FLY"). The fuselage, the wings
and tail assembly are made of foam and are pre-assembled and coloured. Thus, the model, which can be controlled along two axes, can be outfitted and
completed in a short period of time. The controllable features are: Elevator, rudder as well as speed control of the three electric motors. Control is carried out
using a separately available remote control unit which must have at least 3 channels.
In any case a basic knowledge of use of remote control and motor components is required to complete construction of the model. Because of its easy flying
characteristics, this model can however be flown by beginners as well.
To prevent the wheels of the model from being caught up in high grass during landing resulting in damage, the two-leg undercarriage included in the delivery can
be removed in a few steps only.
21