Ottobock C-Brace Gebrauchsanweisung Seite 51

2) Take the weight off the orthosis.
→ Three short beep signals are emitted.
→ The orthosis has successfully switched to LOM mode.
INFORMATION
LOM mode is automatically deactivated by switching to 1st mode or 2nd mode.
Overview – Mode Switching
Table – Mode Switching
From To Push button 1
(top button)
1st 2nd
1st LOM
2nd 1st
2nd LOM
LOM 1st
LOM 2nd
INFORMATION
If 4 short beep signals are emitted after the switching process, this means switching could not
be completed. The most frequent cause of this is that the weight was not taken off the orthosis
after the first beep signal.
Push button 2
(bottom but­
ton)
Long
2x short
Long
2x short
Long
Long
Overview – Movement Patterns
Beep sig­ Additional
nal
Long Weight off orthos­
3x short
Long Weight off orthos­
Long Weight off orthos­
Long Weight off orthos­
Long Weight off orthos­
Beep sig­
action nal
2x short
is
Short
is
3x short
is
Short
is
2x short
is
Ottobock | 51