Scope Of Delivery And Accessories; Scope Of Delivery; Battery Charger; Universal Power Supply - Ottobock C-Brace Gebrauchsanweisung

CAUTION
Overheating of the hydraulic unit due to uninterrupted, increased activity (e.g. extended
walking downhill)
Falling or skin irritation may result, caused by:
► Orthosis malfunction caused by overheating of the hydraulic unit.
► Hydraulic unit defects with associated leakage of liquid.
► Touching overheated components can also cause burns.
→ Take note of recurring beep signals. They indicate the risk of overheating.
→ As soon as these beep signals begins, stop all activities and allow the hydraulic unit to cool
down.
→ Activities may be resumed after the beep signals stop.
→ If the activity is continued after recurring beep signals commence, this may lead to overheat­
ing of the hydraulic unit and damage to the orthosis in extreme cases.

5 Scope of Delivery and Accessories

5.1 Scope of Delivery

• Orthotic system, fully assembled with C-Brace 17B300=L Joint Module (left) or C-Brace
17B300=R Joint Module (right)
• 1 pc. 4E50* Battery Charger
• 1 pc. 757L16* Power Supply

5.2 Battery Charger

The purpose of the battery charger is to charge the battery. LEDs on the charger provide informa­
tion about the operating states of the charger and the battery charge level.

5.3 Universal Power Supply

The universal power supply serves to supply electricity to the battery charger.

6 Preparation for Use

6.1 Explanation of Symbols

Symbol Explanation
LED not illuminated
LED illuminated
LED flashing
Beep signal
1x short
Beep signal
2x short
Beep signal
3x short
Beep signal
4x
4x short
Ottobock | 41