Teaching-In - eQ-3 BC Bedienungsanleitung

The actuator performs an adapter run. "AdA" and the activity
symbol ( ) are displayed; during this time, operation is
not possible.
If the adapter run has been initiated prior to mounting or if
an error message (F1, F2, F3) is displayed, press the Boost
button; the motor reverses to the "InS" position.
If the radiator thermostat has not been taught-in on
the cube, the device automatically switches to
manual operation (Manu).
Teach-in mode can be activated even whilst "InS"
is still displayed. Teach-in mode can be activated
when "InS" is displayed
In order to enable communication between EasyHome
control components, the devices have to be taught-in to
one another.
• Start device detection via the local software. For first
setting please use the install wizard. So you will attain
to „Geräteerkennung". If you already use EasyHome
control, you will find „Geräteerkennung" via menu item
„Meine Geräte".
• To activate teach-in mode on the radiator thermostat,
press and hold down the Boost button for at least 3
seconds. The antenna symbol (
with the teach-in time remaining in seconds. The teach-
in time is 30 seconds.
40

8. Teaching-in

) is displayed, along