Cleaning The Housing And Nozzles; Storage; Troubleshooting - Cleanmaxx Z 08749 Gebrauchsanleitung

Cleaning the housing and nozzles

1. If needed, clean the housing with a damp, soft cloth. Then dry it with a soft cloth.
2. Regularly remove hairs and lint from the nozzles.

Storage

• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for chil-
dren.

Troubleshooting

If your device no longer functions properly, exhibits damages or requires a spare part,
please contact our customer service. For your own safety, do not perform any repairs
yourself.
The following table gives you tips on how to resolve minor problems yourself.
Problem
The vacuum cleaner has no
suction power.
The suction power is weak.
• If not in use, you can attach the tile and brush nozzle to
the bracket provided on the handle as shown.
• For convenient storage, you can push the telescoping
E
tube all the way together and push the hook (E) on the
fl oor nozzle into the bracket (F) on the carrying handle.
F
Potential cause/solution/tips
• Is the mains plug properly connected with the
socket? Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the auxiliary air valve on the handle open? Close
the valve.
• Is the dust bin too full? Empty the bin.
• Are one or both fi lters heavily laden with dirt?
Clean the fi lter(s).
• Is the attached nozzle, telescoping tube or suction
tube plugged? Turn the device off, pull the mains
plug out of the socket and remove the blockage.
22