Cleaning The Housing; Cleaning The Nozzles; Storage - Cleanmaxx VC4807T-240 Gebrauchsanleitung

3. Tap the HEPA motor fi lter out over an open dustbin. Clean the fi lter using a brush if neces-
sary.
4. Insert the HEPA motor fi lter back into the device again.
5. Then fi nally put the exhaust air grille back on. Make sure that the exhaust air grille locks in
place correctly.

Cleaning the housing

Clean the housing, when necessary, using a slightly damp soft cloth.

Cleaning the nozzles

Remove hair and fl uff from the nozzles at regular intervals.
1. If any hair or fl uff has become caught in the cogged wheels of the
2. Pull out any hair or dirt trapped in the cogged wheels.
3. Then close the cogged wheel cover again.

Storage

• Store the vacuum cleaner in a dry, cool place indoors that is not accessible to children and
animals.
•
08200_DE-GB-FR-NL_V1.indb 30 08200_DE-GB-FR-NL_V1.indb 30
turbo nozzle, you can open the cogged wheel cover on the underside
of the nozzle.
For practical storage, you can collapse the telescopic tube as far as
possible and hook the bracket into the back of the device.
30
31.10.12 09:24 31.10.12 09:24