Cleaning Windows And Other Smooth Surfaces; Cleaning The Device And Accessories - Cleanmaxx Z 05348 Anleitung

7. Store the cordless vacuum cleaner in a cool, dry indoor room out of the reach of
children and animals.

Cleaning Windows and Other Smooth Surfaces

1. Prepare the spray bottle: Stretch the wiping cloth onto the wiping attachment and
secure it in place with the Velcro fastener.

Cleaning the Device and Accessories

CAUTION!
❐ Clean the fi lter after each use to maintain good performance and prevent overheating
of the motor.
❐ Switch off the device before doing any cleaning of the device and make sure that it is
not connected to the mains power.
❐ Keep the main unit, the charger and the cable away from water or other liquids to
avoid electric shocks. Make sure that no liquid gets into the main unit during clean-
ing. Only the collecting container, the insert, the fi lter and the suction nozzles may be
cleaned with water. However, they must be completely dry before they are put back
into the device.
❐ The fi lter is neither machine-washable, dishwasher-safe nor suitable for tumble dry-
ing! Only ever dry the fi lter in the air, and never use a hair dryer to do so.
05348_de-gb-fr-nl_V0.indb 25 05348_de-gb-fr-nl_V0.indb 25
2. Fill the spray bottle: Unscrew the spray head from the
spray bottle and fi ll the bottle with cleaning agent and wa-
ter in accordance with the manufacturer's specifi cations.
3. Screw the spray head back onto the bottle with the fi xing
ring.
4. Place the wiping attachment onto the spray head and
press it into the fi xing ring until both parts lock inside one
another.
5. Spray the cleaning agent evenly onto the surface which
is to be cleaned. To do this, press the spray lever of the
bottle.
6. Detach the dirt using the wiping cloth. Note: If necessary,
rinse out the wiping cloth under running water!
7. Insert the window nozzle into the suction opening of the
device.
8. Switch on the device and suck up the cleaning liquid from
the surface by dragging the device from top to bottom.
9. The further procedure is the same as that for using the
device in the conventional way (see above).
25
27.01.2014 10:13:58 27.01.2014 10:13:58