Parker 650 series Bedienungsanleitung Seite 59

Certificates
Issued for
compliance In accordance with the EEC Directive
with the EMC
Directive when
We Parker SSD Drives, address as below,
the unit is used
declare under our sole responsibility that the
as relevant
above Electronic Products when installed and
apparatus.
operated with reference to the instructions in
the Product Manual (provided with each piece
of equipment) is in accordance with the
relevant clauses from the following standard:-
This is
provided to aid We Parker SSD Drives, address as below,
declare under our sole responsibility that the
your
above Electronic Products when installed and
justification for
operated with reference to the instructions in
EMC
the Product Manual (provided with each piece
compliance
of equipment) is in accordance with the
when the unit
relevant clauses from the following standard:-
is used as a
component.
Parker Hannifin Ltd., Automation Group, SSD Drives Europe
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000
Registered Number: 4806503 England.
650 Series AC Drive
650 0.37 - 7.5
EC D
ECLARATIONS OF
Date CE marked first applied: 26/07/2001
EMC Directive
2004/108/EC
BSEN61800-3 (2004)
M
ANUFACTURERS
EMC Declaration
BSEN61800-3 (2004)
Dr Martin Payn (
Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
Certification for the Drive
W 400V
K
C
ONFORMITY
Low Voltage Directive
In accordance with the EEC Directive
2006/95/EC
We Parker SSD Drives, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual (provided with each piece
of equipment), is in accordance with the
following standard :-
EN50178 (1998)
D
ECLARATIONS
Machinery Directive
The above Electronic Products are components
to be incorporated into machinery and may not
be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
89/392/EEC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Conformance Officer)
FAX: +44(0)1903 737100
10-5
The drive is CE
marked in
accordance with
the low voltage
directive for
electrical
equipment and
appliances in the
voltage range
when installed
correctly.
Since the
potential hazards
are mainly
electrical rather
than mechanical,
the drive does not
fall under the
machinery
directive.
However, we do
supply a
manufacturer's
declaration for
when the drive is
used(as a
component) in
machinery.