Parker 650 series Bedienungsanleitung Seite 193

Zertifizierung
bei Ent- In accordance with the EEC Directive
sprechung mit
der EMV
We Parker SSD Drives, address as below,
Richtlinie,
declare under our sole responsibility that the
wenn der
above Electronic Products when installed and
Antrieb als
operated with reference to the instructions in
relevante
the Product Manual (provided with each piece
Apparatur
of equipment) is in accordance with the
eingesetzt
relevant clauses from the following standards:-
wird.
Dies dient als
Hilfe zur
We Parker SSD Drives, address as below,
declare under our sole responsibility that the
eigenen
above Electronic Products when installed and
Beurteilung
operated with reference to the instructions in
der EMV
the Product Manual (provided with each piece
Entsprechung,
of equipment) is in accordance with the
wenn der
relevant clauses from the following standards:-
Antrieb als
Komponente
eingesetzt
wird.
Parker Hannifin Ltd., Automation Group, SSD Drives Europe
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000
Registered Number: 4806503 England.
Frequenzumrichter 650 Baugröße 1, 2 & 3
650 0.37 -7.5
EC D
ECLARATIONS OF
Date CE marked first applied: 26/07/2001
EMC Directive
2004/108/EC
BSEN61800-3 (2004).
M
ANUFACTURERS
EMC Declaration
BSEN61800-3 (2004).
Dr Martin Payn (
Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
Zertifzierung des Umrichters
W 400V
K
C
ONFORMITY
Low Voltage Directive
In accordance with the EEC Directive
2006/95/EC
We Parker SSD Drives, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual (provided with each piece
of equipment), is in accordance with the
following standard :-
EN50178 (1998)
D
ECLARATIONS
Machinery Directive
The above Electronic Products are components
to be incorporated into machinery and may not
be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
89/392/EEC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Conformance Officer)
FAX: +44(0)1903 737100
10-5
Der Antrieb
erhält das CE
Zeichen,wenn er
bei korrekter
Installation den
Vorschriften
gemäß Nieder-
spannungsricht-
linie für
elektrische An-
lagen und Geräte
im Spannungs-
bereich
entspricht.
Weil potentielle
Gefahr meist
elektrischen und
nicht mecha-
nischen Ur-
sprungs ist, fällt
der Antrieb nicht
unter die
Maschinenricht-
linie. Es kann
jedoch eine
Erklärung des
Herstellers
geliefert werden,
wenn der Antrieb
(als Kompo-
nente) in einer
Maschine
eingesetzt wird.