Led Indications - Parker 650 series Bedienungsanleitung

Note: This Option can only be used on drives using software version 4.1 or higher.
650 Series AC Drive

LED Indications

The module has three LEDs providing diagnostic
information about the 650 host drive's 'Health',
'Receive' and 'Transmit' activity.
HEALTH = Green, Rx = Red, Tx =Red
LED Name LED Duty
HEALTH
INTERMITTENT
Rx
INTERMITTENT
Tx
Configure the Drive
Before the module can be used you must configure the drive to your system. Set-up the
parameters in the SERIAL menu as appropriate. Refer to Chapter 6: "Programming Your
Application" - SET::SERL Menu, parameters
For Tag number information refer to the 650 Software Product Manual, available on the Parker
SSD Drives website: www.SSDdrives.com.
Drive State
Re-configuration, or corrupted non-volatile
SHORT FLASH
memory at power-up
Tripped
EQUAL FLASH
Healthy
ON
Braking
LONG FLASH
No drive power, or serious hardware fault
OFF
Indicates activity on the 'receive' line carrying
data from the Master
Indicates activity on the 'transmit' line carrying
data to the Master
S
SE01 to
Installing the Drive
S
SE08.
3-9