He Eypad; Controlling The Drive Using The Keypad; Control Key Definitions - Parker 650 series Bedienungsanleitung

T K
HE EYPAD
0

Controlling the Drive using the Keypad

Control Key Definitions

650 Series AC Drive
The Keypad (Man-Machine Interface, MMI)
provides for local control of the drive, monitoring,
and complete access for application programming.
The 650 can be fitted with either a Standard or
Remote Keypad. Both Keypads fit on the front of
the drive, but the Remote Keypad (with its extra
connector) can also be remote-mounted up to 3
metres away using a connecting lead: refer to
Chapter 3: "Installing the Drive" – Fitting the
Remote Keypad.
To remove a Keypad, simply pull it away from the
drive. To refit it, push it back into place.
The product rating label identifies the
Drive/Keypad type: refer to Chapter 9: "Technical Specifications" – Understanding the Product
Code.
The Power-Up Condition
On initial power-up, direct from the factory, the drive is in Local Control and the MMI will
display the Local Setpoint,
All parameters will be at factory default settings. Any changes to these conditions are
automatically saved. The drive will initialise on subsequent power-ups with the previously saved
settings and control mode, Local or Remote Control.
Key Operation
Escape
Menu
Increment
Decrement
Run
Stop
Local
Control
Key
.
Description
Navigation
– Displays the previous level's menu
Parameter
– Returns to the parameter list
Trip Display – Removes Trip or Error message from display
allowing investigation of parameters
Navigation
– Displays the next menu level, or the first
parameter of the current Menu
Parameter – Moves cursor to the left when the parameter is
adjustable
Navigation
– Move upwards through the menu system
Parameter
– Increase value of the displayed parameter
Local Mode
– Increase value of the local setpoint
Navigation
– Move down through the menu system
Parameter
– Decrease value of the displayed parameter
Local Mode
– Decrease value of the local setpoint
Local Mode
– Run the drive
Trip Reset
– Resets trip condition allowing drive to resume
operation
Local Mode
– Stops the drive. Trip Reset in all modes
Navigation –
Press and hold to toggle between Local and
Remote Control modes (refer to page 5.4)
Trip Reset
– Resets trip condition allowing drive to resume
operation
5-1
The Keypad
Local
Control
Programming Keys Key