Herunterladen Inhalt Inhalt Diese Seite drucken

KEB COMBIVERT F0 V1.2 Betriebsanleitung Seite 60

Inhaltsverzeichnis

Werbung

Schlupfkompensation / Spannungserhöhung
In diesem Parameter wird die Höhe der Spannungsan-
hebung eingestellt, die während der Schlupf-
kompensation wirksam ist. Der Wert ist im Bereich von
0...99 empirisch zu ermitteln. Ist der ausgewählte Wert
zu klein, neigt der Motor zum Schwingen. Bei einem zu
großen Wert kann der Motor heiß laufen oder ein OC-
bzw. OL-Fehler ausgelöst werden. Einstellanweisung
siehe Anhang A.4.
Einstellbereich:
0...99
Standard:
0
Auflösung:
1
Schlupfkompensation / min. Frequenz
In diesem Parameter wird der minimale Frequenzwert
festgelegt, ab dem die Schlupfkompensation wirksam
wird. Der Wert kann maximal bis auf d.21 erhöht wer-
den.
Schlupfkompensation / max. Frequenz
In diesem Parameter wird die maximale Frequenz ein-
gestellt, bis zu der die Schlupfkompensation wirksam
ist. Der Wert kann minimal bis auf d.20 verringert und
maximal bis auf d.0 erhöht werden.
60
Einstellbereich
Standard
Setting range
4.0... 40.0 Hz
10.0 Hz
40.8... 81.6 Hz
84.8... 398 Hz
Einstellbereich
Standard
Setting range
4.0... 40.0 Hz
40.8... 81.6 Hz
49.6 Hz
84.8... 398 Hz
Slip compensation / auto torque gain
The height of the voltage increase, that shall take effect
during the slip compensation, is adjusted in this parameter.
The value must be determined empirically in the range of
0...99. If the selected value is too low the motor tends to
vibrate, but if the selected value is too high the motor may
run hot or an OC or OL-Error is triggered. Adjustment
instructions see Annex A,4.
Setting range:
0...99
Standard:
0
Resolution:
1
Slip compensation / min. frequency
With this parameter the minimum frequency is set from
which the slip compensation takes effect. The value can
be increased up to d.21.
Auflösung
Resolution
0.4 Hz
0.8 Hz
3.2 Hz
Slip compensation / max. frequency
The maximum frequency, up to which the slip
compensation remains in force, is adjusted in this
parameter. The value can be decreased minimal to d.20
and increased maximal to d.0.
Auflösung
Resolution
0.4 Hz
0.8 Hz
3.2 Hz

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis