Calling Up The Configuration Level - wtw EcoLine LF 170 Bedienungsanleitung

Calling up the configuration level

− Press the DOWN key.
− Press the ENTER key.
The display shows the following:
The following display appears:
If an incorrect code is entered or the ESCAPE key pressed, access to
the configuration is made in the viewing mode.
Note:
Settings can be inspected but not changed.
Configuration
The first numeral flashes.
No code number is set in the delivery state.
To access the configuration level
− press the ENTER key 3 times.
If a code number was already set in an earlier
parameterization, proceed as follows:
− Set the first numeral using the UP / DOWN
keys.
− Press ENTER to confirm the input.
− Set the other two numerals in the same way.
− Use the UP / DOWN keys to change between
PA and C0 (configuration).
− To go to the configuration level, select
− Press the ENTER key to confirm the input.
CO
.
103