Connecting The Ki/S Connection Box To The Lf 170 Using - wtw EcoLine LF 170 Bedienungsanleitung

Connecting the KI/S connection box to the LF 170 using the K 160 Connecting the KI/S connection box to the LF 170 using the K 160
plug and EK/AG cable plug and EK/AG cable
The sensor cable can be extended to a max. length of 100 m cable. The sensor cable can be extended to a max. length of 100 m cable.
To do this, connect the K 160 plug of the EK/AG cable to the To do this, connect the K 160 plug of the EK/AG cable to the
KI/S connection box. KI/S connection box.
96 96
Installation Installation
− Slide the screw-type cable gland − Slide the screw-type cable gland
, seal , seal and sleeve and sleeve
− Solder the plug − Solder the plug
Wiring side of the instrument plug: Wiring side of the instrument plug:
gn gn
6 6
ge ge
− Latch the strain relief − Latch the strain relief
screw the cable clamp screw the cable clamp
The cable clamp The cable clamp
sheath to relieve the strands. sheath to relieve the strands.
Screw the plug Screw the plug
Pay attention to the vertical alignment of the Pay attention to the vertical alignment of the
sleeve sleeve ! !
− Screw the rubber seal − Screw the rubber seal
screw the washer screw the washer
onto the cable onto the cable
to the cable to the cable
bn bn
5 5
4 4
7 7
3 3
1 1
2 2
ga ga
into the plug into the plug
to the strain relief to the strain relief
must lie on the cable must lie on the cable
to the sleeve to the sleeve
to the cable to the cable
into the sleeve into the sleeve
, washer , washer
. .
. .
Shield Shield
ws ws
rs rs
and and
. .
. .
and and
. .