Setting The Parameters For Limit Indicators - wtw EcoLine LF 170 Bedienungsanleitung

Setting the parameters for limit indicators

Example: Set up the upper limit for "
Parameterization
χ
" on relay 1.
− Press the ENTER key to enter the
submenu:
− Press the ENTER key again to set this
limiting value.
The first/second/third or fourth numeral is
flashing (depending on the confirmed
measuring range).
− Use the UP / DOWN keys to set the
numeral (flashing) of the limiting value and
confirm it by pressing the ENTER key.
− Set the other numerals in the same way.
− Confirm the last numeral using the ENTER
HS
key and the
− Use the UP / DOWN keys to set the
numerals (flashing) of the hysteresis.
− Press the ENTER key to confirm the input.
− Set the other numerals in the same way.
Setting range: 0 to 10 % from the measuring
range.
− Confirm the last numeral using the ENTER
td
key and the
submenu appears.
submenu appears
PL
.
117