Overview table of the submenus
Overview table of the submenus
Display
Display
CIn
CIn
Select probe
Select probe
CFu
CFu
Select operating mode
Select operating mode
Crn
Crn
Select final value of measuring
Select final value of measuring
range
range
CR1
CR1
Select Recorder 1
Select Recorder 1
CR2
CR2
Select Recorder 2
Select Recorder 2
Assignment of the pilot relay
Assignment of the pilot relay
+ Menu appears in the corresponding model of the instrument.
+ Menu appears in the corresponding model of the instrument.
See the flow chart in the appendix.
See the flow chart in the appendix.
Selecting the sensor
Selecting the sensor
The following sensors can be connected:
The following sensors can be connected:
•
•
®
®
TetraCon
TetraCon
700, TetraCon
700, TetraCon
•
•
Cells with the constants: 0.01; 0.1; 1; 10
Cells with the constants: 0.01; 0.1; 1; 10
•
•
WTW laboratory cells with variable adjustment of the cell constant
WTW laboratory cells with variable adjustment of the cell constant
Refer to survey page appendix 1 "Selection of the suitable measuring cell" "
Refer to survey page appendix 1 "Selection of the suitable measuring cell" "
− Press the UP / DOWN keys to select a sensor.
− Press the UP / DOWN keys to select a sensor.
− Press the ENTER key to confirm the selection.
− Press the ENTER key to confirm the selection.
104
104
Description
Description
®
®
600 and TetraCon
600 and TetraCon
Example:
Example:
TetraCon ® 700
TetraCon ® 700
− Press the UP / DOWN keys to select the
− Press the UP / DOWN keys to select the
operating modes χ or Sal.
operating modes χ or Sal.
− Press the ENTER key to confirm it.
− Press the ENTER key to confirm it.
Configuration
Configuration
Basic
Basic
instrument
instrument
+
+
+
+
+
+
+
+
®
®
300
300
Option
Option
Relay
Relay
T Option
T Option
+
+
+
+