Calling Up The Parameterization Level - wtw EcoLine LF 170 Bedienungsanleitung

Calling up the parameterization level

Calling up the parameterization level from the measuring mode
− Press the DOWN key
− Press the ENTER key
Calling up the parameterization level from the configuration mode
After the configuration has been completed, press the ENTER key.
The following display appears:
If an incorrect code is entered or the ESCAPE key pressed, access to the
configuration is made in view mode. That is to say, settings can be
checked but not changed.
Parameterization
The first numeral flashes.
No code number is set in the delivery state.
To access the configuration level
− press the ENTER key 3 times.
If a code number was already set in an earlier
parameterization, proceed as follows:
− Set the first numeral using the UP / DOWN
− Press ENTER to confirm the input.
− Set the other two numerals in the same way.
− PA appears.
− It is possible to reach the parameterization
− Press the ENTER key to confirm the input.
keys.
level directly by pressing the UP / DOWN
keys.
113