Line Power; Switching On The Meter - wtw Multi 3500i Bedienungsanleitung

Multi 3500i

Line power

The power pack supplies the measuring instrument with low voltage
(9 V DC). At the same time, the rechargeable batteries are charged (approx.
36 hours). The LoBat display indicator appears if the batteries are nearly
empty.
Caution
The line voltage at the operating site must lie within the input voltage
range of the original power pack (see T
Caution
Only use original power packs (see T
2
If necessary, replace the Euro plug (1) on the power pack (2) by the
country-specific plug suitable for your country.
Connect the plug (3) to the socket (4) of the meter.
Connect the power pack (2) to an easily accessible power socket.

Switching on the meter

Press the < > key.
An opening screen with instrument identification data appears on the
screen for a short time. Subsequently, the measured value display
appears. The meter displays the measuring windows of all connected
sensors.
ECHNICAL DATA
ECHNICAL DATA
4
3
1
Line power
).
).
19