Checking Mode; Calling Up The Checking Mode; Displaying The Code Number; Recorder Output 1 - wtw EcoLine LF 170 Bedienungsanleitung

The checking mode may only be used by trained specialist The checking mode may only be used by trained specialist
personal as special knowledge is required. personal as special knowledge is required.
The interfaces of the LF 170 or LF 296 and connected peripheral devices The interfaces of the LF 170 or LF 296 and connected peripheral devices
(e.g. recorder, PLC, PC, printer) can be checked in the checking mode. (e.g. recorder, PLC, PC, printer) can be checked in the checking mode.
Furthermore, the user can display the code number. Furthermore, the user can display the code number.

Calling up the checking mode

Calling up the checking mode
To leave the measuring mode and enter the checking mode, press and hold To leave the measuring mode and enter the checking mode, press and hold
– –
down the ESCAPE key and briefly press the UP key down the ESCAPE key and briefly press the UP key
Leave the checking mode again by pressing the M or C key. Leave the checking mode again by pressing the M or C key.
– –

Displaying the code number

Displaying the code number
The code number is displayed in the The code number is displayed in the
130 130

Checking Mode

Checking Mode
Cod Cod
submenu after pressing the ENTER key: submenu after pressing the ENTER key:
− Press the ENTER key again to continue with − Press the ENTER key again to continue with

recorder output 1

recorder output 1