Configuration; Factory Settings - wtw EcoLine LF 170 Bedienungsanleitung

The configuration defines the operating mode of the instrument. To do this, the The configuration defines the operating mode of the instrument. To do this, the
configuration level is split into submenus (see the flow chart in the appendix). configuration level is split into submenus (see the flow chart in the appendix).
The submenus only offer those setting options that have not yet been The submenus only offer those setting options that have not yet been
established on the basis of the previous program configuration. established on the basis of the previous program configuration.
Access to the configuration level can be protected via a code. Access to the configuration level can be protected via a code.
Perform the configuration with the instrument in a ready-to-operate Perform the configuration with the instrument in a ready-to-operate
condition, i.e.: with the monitor connected to the supply voltage and the condition, i.e.: with the monitor connected to the supply voltage and the
measuring probe connected. measuring probe connected.

Factory settings

Factory settings
Adjustable function Adjustable function
Probe Probe
Configuration function Configuration function
Final value of measuring range Final value of measuring range
Measuring range of recorder output 1 Measuring range of recorder output 1
Temperature range of recorder output 2 Temperature range of recorder output 2
2) 2)
Relay function Relay function
1) only in the T option 1) only in the T option
2) only in the Relay option 2) only in the Relay option
102 102

Configuration

Configuration
Setting Setting
® ®
TetraCon TetraCon
χ χ
AutoRange AutoRange
0 ... 199.9 mS/cm 0 ... 199.9 mS/cm
1) 1)
0 ... 50 °C 0 ... 50 °C
nF REL1 nF REL1
(no function for rel. 1) (no function for rel. 1)
nF REL2 nF REL2
(no function for rel. 2) (no function for rel. 2)
Menu item Menu item
CIN CIN
700 700
CFu CFu
Crn Crn
CR1 CR1
CR2 CR2
CRc CRc