Wiring Of Ki/S - wtw EcoLine LF 170 Bedienungsanleitung

Wiring of KI/S

Unused wires must not jut into the housing. Otherwise,
malfunctions can occur. This especially applies to the ground wire
of the mains cable.
Cut off unused wires in the housing as close to the armored thread
joint as possible.
Note:
After conncection of the 8-wire EK 170 cable 2 wires remain unused, from the 7-wire
EK/AG cable 1 wire remains unused.
The unused "wire" should be fixed in position or pinched off.
Installation
Strip terminal
1
2
3
4
5
6
7
Colour of wires
yellow
gray
pink
Shield
brown
green
white
101