Troubleshooting - Cocraft MB1931-UK Bedienungsanleitung

Troubleshooting

Problem Possible cause
Woolly grain. 1. The wood is too damp.
2. Blunt planing irons.
Torn grain. 1. Too deep planing.
2. Planing against the grain.
3. Blunt planing irons.
Hard/ 1. Blunt planing irons.
residue grain.
2. Too deep planing.
3. The wood is too damp.
4. The cutter layer is damaged.
Uneven 1. The planing iron is crooked.
planing, sides
2. The cutter head is
have uneven
thickness.
The thickness 1. The saw's depth scale is
of the wood
does not
correspond
to the setting
on the planing
depth scale.
The chain 1. The chain collar is not
jumps.
2. The chain collar is worn.
not evenly set against
the planing table.
incorrect.
straight.
16
Possible solution
1. Dry the wood.
2. Sharpen the planing irons.
1. Adjust planing depth.
2. Plane the wood in the other
direction or turn wood
around.
3. Sharpen the planing irons.
1. Sharpen the planing irons.
2. Adjust planing depth.
3. Clean the wood.
4. Change cutter layer.
1. Adjust the planing iron.
2. Adjust the cutter head so
that it is more evenly set
against the planing table.
1. Adjust the saw's
depth scale.
1. Straighten the chain collar.
2. Change the chain collar.