Care And Maintenance; Troubleshooting Guide; Responsible Disposal - Cocraft HA 125 Original Bedienungsanleitung

Care and maintenance

Always keep the motor's ventilation openings free of dust and debris. If needed,
wipe the housing using a soft damp cloth. Avoid using solvents and abrasive
cleaning agents.

Troubleshooting guide

The machine does not start
• Make sure that the machine is plugged in to a wall socket and that
the socket is supplied with electricity.
• Faulty power switch.
Motor speed too low
• Do not apply as much pressure to the disc/wheel.
• Motor is overheated – shut it off and let it cool.
Heavy vibrations
• Cutting/grinding disc is damaged – change to a new one.
• Cutting/grinding disc loose – make sure that it is seated properly and tightly.

Responsible disposal

This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Rated voltage 220–240 V AC, 50 Hz
850 W
Rated power
11000 rpm
No-load speed
Ø 125 mm
Disc diameter
Spindle thread M14
Noise LpA = 87.4 dB(A), K = 3 dB(A)
LwA = 98.4 dB(A), K = 3 dB(A)
7.41 m/s², K = 1.5 m/s²
Vibration level
Weight 2.3 kg (excluding grinding disc)
12