Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Care and maintenance
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
•
Unplug the mains lead before changing the sanding belt or carrying out any maintenance,
or service.
•
Keep the motor ventilation openings free from contaminants.
•
Wipe the exterior of the belt sander clean with a dry cloth and vacuum clean it if needed.
•
Store the belt sander in a dry place out of children's reach whenever it is not to be used for
a long time.
Troubleshooting guide
Sander doesn't start.
The sander runs slowly.
Poor sanding result.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can
be disposed of in a responsible manner. When recycling your product, take
it to your local collection facility or contact the place of purchase. They will
ensure that the product is disposed of in an environmentally sound manner.
Specifications
Voltage
Power
Belt speed
Sanding area
Weight
Sanding belt
LpA (sound pressure)
LwA (sound power)
Vibration value
•
Make sure that the mains lead is undamaged and
securely plugged into a wall socket.
•
Is the wall socket live?
•
Do not apply too much downward pressure on the sanding belt.
•
Is the sanding belt worn? Replace if necessary.
230 V AC, 50 Hz
920 W
150–270 m/min
75 × 130 mm
2.7 kg
75 × 533 mm (3" × 21")
90.3 dB(A), K = 3 dB(A)
101.3 dB(A), K = 3 dB(A)
a
= 2.5 m/s², K = 1.5 m/s²
h
8
Werbung
Fehlerbehebung
