Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
20. Check the following before starting machine:
•
That all covers and other parts are undamaged and fulfil their function.
•
That moving parts are able to rotate freely and are correctly aligned.
•
That no moving parts can get stuck.
•
That no defect has emerged.
•
Other circumstances that may affect your work performance.
•
A cover or some other part that is damaged should be repaired by the panel
or exchanged. Damaged electrical cables and circuit breakers should always
be changed by professionals. Never use the machine if you are unable to turn
it off or start it up in a satisfactory manner.
21. Use recommended attachments.
Using non-recommended attachments can cause accidents or increase risk of
personal injury.
22. Repairs should only be made by qualified technicians.
The machine meets the stipulated safety demands. Repairs to the machine
should always be carried out by experts using original reserve parts; otherwise
the machine may cause accidents or increase risk of
personal injury.
Special safety regulations for planes
•
Never use machine without correctly mounted and adjusted protective covers.
•
Never use blunt planing irons as this increases risk of kickback.
•
The parts of the cutting steel not in use should be covered.
•
When planing shorter pieces a pusher should be used.
•
When planing narrow pieces further precautions need to be taken to insure safe
work, such as appliances for pushing the work piece from above and springloaded
protection.
•
Planes may not be used for folding, milling, making marks or pegs.
Safety symbols
Use ear protection.
Use protective glasses or visor.
Use breathing protection.
Read through the entire manual before use and save for future reference.
5
Werbung
Inhaltsverzeichnis
Fehlerbehebung
