Care And Maintenance; Troubleshooting Guide; Specifications - Cocraft LXC AG18 Bedienungsanleitung

Care and maintenance

Important: Always remove the battery from the power tool before adjusting,
servicing or repairing it.
• Keep the angle grinder's ventilation openings free from contaminants.
• Clean the angle grinder using a lightly moistened cloth. Only use mild
cleaning agents, never solvents or corrosive chemicals.

Troubleshooting guide

Problem Possible cause
The angle Battery discharged.
grinder will
The battery is overheated.
not switch
Worn brushes.
on.
The safety switch is not held in.
The angle Too much pressure applied.
grinder is
Battery discharged.
sluggish
The battery is overheated.
and/or shuts
The motor is overheated.
off.
Faulty brushes.
Heavy Grinding disc/accessory is
vibrations. damaged.
Grinding disc/accessory is loose.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can
be disposed of in a responsible manner. When recycling your product, take
it to your local collection facility or contact the place of purchase. They will
ensure that the product is disposed of in an environmentally sound manner.

Specifications

Wheel/disc capacity
Spindle thread
Max speed
Noise level
Vibration level
Battery
Weight
(Battery and charger sold separately)
115 mm
M14
6500 rpm
LpA: 82.2 dB(A), uncertainty KpA: 3 dB(A)
LwA: 93.2 dB(A), uncertainty KwA: 3 dB(A)
a : 2.151 m/s², uncertainty K: 1.5 m/s²
h
18 V lithium-ion LXC (sold separately)
1.6 kg (without battery)
14
Solution
Recharge the battery.
Let the battery cool down.
Contact our Customer Services.
Hold in the safety switch and
then press the on/off switch.
Decrease applied pressure.
Recharge the battery.
Let the battery cool down.
Let the motor cool down.
Contact our Customer Services.
Check and replace if necessary.
Check and replace if necessary.