Use Of The Machine; Preparation Of The Machine - Profitec Pro 800 Bedienungsanleitung

4 The machine is now ready for use. Put the cups on the cup heater tray in order to preheat them and
enjoy your coffee.
When using a shut-off valve, please be sure to close the valve after having finished operations.
Make sure that the machine is placed in a watertight area.
Portafilter, cup warming tray and drip tray are not suitable for the dish washer.
6

USE OF THE MACHINE

6.1 Preparation of the machine

The switched off machine is to be placed into operation as follows:
Water tank machine or machine in use with water tank
1 Fill the water tank.
2 Make sure there is enough water in the tank.
3 Now turn the machine on (the metal switch in the upper position and the right switch behind the drip tray
in position '0').
4 Please wait until the gauge indicates a value of 1.0 – 1.25 bars and the desired temperature is reached.
5 In general, the machine will be heated up in about 40 minutes, depending on the ambient temperature.
6 The machine is now ready for use.
7 Put the portafilter into the brew group to heat it to an optimal temperature.
Caution-danger of injury!
If the portafilter is not inserted properly, there is a great risk of injury. Never remove the
portafilter when there is remaining pressure in the piston of the brew group.
Caution!
Please use the included portafilters only. Otherwise there is a danger of injury.
Machine in use with direct water connection
1 Please make sure that there is always water pressure in the water connection line.
2 Now turn the machine on (the metal switch in the upper position and the right switch behind the drip tray
in position '1').
3 Wait until the gauge indicates a value of 1.0 – 1.25 bars.
4 In general, the machine will be heated up in about 40 minutes, depending on the ambient temperature.
5 The machine is now ready to use.
6 Put the portafilter into the brew group to heat it to an optimal temperature.
It is recommended to leave the portafilter in the brew group, keeping it warm for an optimum
temperature for coffee dispension.
If you would like to plumb your machine, installation through a qualified service
technician is required.
Bedienungsanleitung/Instruction manual PRO800 23
ENGLISH