Technical Data; Pid-Temperature Control; Machine Installation; Preparation For Installation - Profitec Pro 800 Bedienungsanleitung

3.2 Technical data

Voltages:
Power:
Water tank:
Measurements (without lever/portafilter):
Measurements (with lever/portafilter):
Weight:

1.3 PID-Temperature Control

The PID-temperature regulation allows for an adjustment of the temperature in the boiler. This means that
you can brew your coffee at different temperatures. PID stands for "proportional-integral-derivative"
4

MACHINE INSTALLATION

The installation is to be carried out by qualified specialists exclusively, according to the
following instructions and in compliance with valid laws and local regulations.

4.1 Preparation for installation

Attach the lever handle to the brew group and make sure that it is properly fastened.
Caution-danger of injury!
If the portafilter is not inserted properly, there is a great risk of injury. Never remove the
portafilter when there is remaining pressure in the piston of the brew group.
It is not possible to interrupt the brewing process. Do not remove the portafilter until the lever
is back in neutral position.
• Place the machine on an even and stable surface.
• Never place the machine on hot surfaces.
• Place the machine on a water-proof surface, as the machine may at some point leak
water.

4.2 Electrical connection

• Make sure that the local main voltage supply corresponds to the information given on the
type plate on the front panel of the espresso machine.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.

4.3 Water supply connection

Important!
Make sure that the fixed water connection of the machine is hooked up to a potable water
supply with an operational pressure of 2 to 3 bars.
Please note that the pressure of the water supply may not always be consistent. As soon as 3
bars of pressure are occasionally exceeded, install a pressure reducer.
Bedienungsanleitung/Instruction manual PRO800
EU: 230 V
US: 115 V
EU: 1.600 W
US: 1.500 W
ca. 3.0 l
W x T x H / 340 mm x 510 mm x 420 mm
W x T x H / 340 mm x 580 mm x 730 mm
35,5 kg
20
ENGLISH