Busch-Jaeger Busch-Wächter Präsenz tech 6813-101 Betriebsanleitung Seite 107

Operation
a. In conjunction with 6813-101 and all switch inserts
Control via the "ON" and "OFF" pushbuttons of the remote control is identical to control as
described in Chapter 7.1.
In addition, the brightness limit value can be changed via the IR Manual Transmitter. To do
this, proceed as follows:
Lighting is on
• Press OFF briefly:
• Press MEMO twice:
Lighting is off
• Press ON briefly:
• Press MEMO twice:
The lighting will be switched off.
A higher brightness limit value will be stored.
The Presence Detector immediately accepts the value.
The lighting will be switched on.
A lower brightness limit value will be stored.
The Presence Detector immediately accepts the value.
GB
107