Operation
7.2 Operation via IR Hand-held Transmitter 6010
Operation depends on which FM Insert is combined with the Presence Detector. The mode
of operation is the same as in the case of operation via the pushbutton.
• Set the hand-held transmitter 6010 to Channel 10 (blue area, pair of pushbuttons 5).
• When operating, always point the hand-held transmitter directly towards the Presence
Detector.
Control via the IR Manual Transmitter is first possible one minute after the Presence
Detector has been plugged in.
NOTE
IR reception is only ensured if you are positioned, with the IR hand-held transmitter,
below the Presence Detector.
GB
106