Setting Up The Device; Connecting Devices; Connecting The Monitor; Connecting The Mouse - Fujitsu FUTRO S400 Kurzanleitung

Short description
The connections are located on the front and back of the device. The ports available on your device
depend on the configuration level you have selected. The standard ports are marked with the
symbols shown below (or similar).
Keyboard port
Serial port
Monitor port
Headphones
Audio output (Line out)
USB - Universal Serial Bus
DVI interface

Setting up the device

So that the casing is sufficiently ventilated and to prevent overheating, the device
!
may only be operated in the vertical operating position with the base foot attached.
► Slide your device into the base foot from the front toward the rear until it engages on the right-
hand side.

Connecting devices

Connecting the monitor

► Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
► Plug the data cable into the monitor port
► Plug the monitor power cable into the grounded mains outlet.

Connecting the mouse

Connecting a PS/2 mouse
► Connect the PS/2 mouse to the PS/2 mouse port
English - 4
PS/2 mouse port
Parallel interface / Printer
Microphone jack
Audio input (Line in)
LAN
LAN port
of the device.
of the device.
A26361-K522-Z123-1-7419, edition 2