Configuration; Calling Bios Setup; Pxe System Boot - Fujitsu FUTRO S400 Kurzanleitung

Short description

Configuration

Calling BIOS Setup

► When the system starts, press the Del key (several times if necessary).
The BIOS-Setup will be started. Select one of the tabs to access other setting options in BIOS-Setup.

PXE system boot

► If you started the device using the ON/OFF switch, press the F12 key (several times if
necessary) when the system starts.
The boot menu is displayed.
► Select the desired boot option.
Calling the PXE system start configuration menu
► Press the key combination
displayed.
Following or a similar display appears on the screen:
Network Boot Protokol
Boot Order
Show Config Message
Show Message Time
<ESC>
Quit
Screen of configuration menu
English - 8
+ F10 while Realtek RTL8139(X)/8130/810X Boot Agent is
Realtek RTL 8139 / 8130 / 810X BOOT Agent
Configuration Menu
<Space>
Change Value
v2.13
PXE
Int19h
Enable
3 Seconds
<Enter>
Next Option
A26361-K522-Z123-1-7419, edition 2
[RLP]
[PnP/BEV(BBS)
/ROM Disabled/
Int18h]
[Disable]
[5 / 8]
<F4>
Save/Quit