Short description
Removing a module without a direct mainboard connector (e.g. WLAN module)
►
Open the casing (see "Opening the casing").
►
Detach the cable from the module and mainboard.
►
Close the casing (see "Closing the casing").
English - 20
1
1
►
Loosen the screws (1).
►
Remove the plastic cap.
►
Pull the WLAN module carefully out of the
installation opening.
►
Refit the installation slot cover if you do not
want to install any other module.
A26361-K522-Z123-1-7419, edition 2