Setting Up The Device; Vertical Operating Position - Fujitsu FUTRO S700 Bedienungsanleitung

Getting started

Setting up the device

To ensure that the casing is sufficiently ventilated and to prevent overheating, the device
must be operated with the base foot attached and with the unit free-standing.
If the device is to be built-in, adequate ventilation must be assured.
Fit the base feet for horizontal or vertical operation (see
Page 9 - English
Base feet for horizontal operation are available as an option.

Vertical operating position

Sidecover Base feet Operatingposition,vertical Verticaloperatingposition
Use the supplied foot when the device is to be used in a vertical position.
Proceed as follows to operate the device in the vertical operating position:
► Disconnect the cables if required.
► Push the device onto the foot in the direction of the arrow.
► If necessary, reconnect any cables that were previously disconnected.
Fujitsu Technology Solutions
and "Horizontal operating position (optional)", Page 10 -
"Vertical operating position",
English).
English - 9
45