Connecting A Keyboard; Connecting The Device To The Network (Lan); Connecting Other External Devices - Fujitsu FUTRO S400 Kurzanleitung

Connecting USB mouse
► Connect the USB mouse to the USB port

Connecting a keyboard

Connecting standard keyboard
Use the supplied keyboard cable only.
► Plug the rectangular connector of the keyboard cable into the rectangular socket on the
underside or on the rear of the keyboard.
► Plug the round plug of the keyboard cable into the keyboard port
Connecting USB keyboard
Use the supplied keyboard cable only.
► Plug the rectangular connector of the keyboard cable into the socket on the underside or on the
rear of the keyboard.
► Insert the flat rectangular USB plug of the keyboard cable into a USB port

Connecting the device to the network (LAN)

► Connect the 10/100 Base T network cable to the RJ45 LAN port.

Connecting other external devices

Read the documentation on the external device before connecting it.
!
With the exception of USB devices, always remove all power plugs before connecting
external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order described below.
The functionality of the connectable external devices is dependent on the operating
i
system used. The external devices which can be connected and additional detailed
information are available on the Internet at www.myelux.com
Connecting cables
► Turn off all power and equipment switches.
► Remove all power plugs from the grounded mains outlets.
► Plug all cables into the device and peripherals. You must observe the information provided in
the "Important notes" chapter.
► Plug all data communication cables into the utility sockets.
► Plug all power cables into the grounded mains outlets.
A26361-K522-Z123-1-7419, edition 2
of the device.
Short description
on the device.
of the device.
English - 5