Groups Of Days; Single Days; Hourly Programming Edit Procedure (Heating / Dhw) - Baxi luna platinum+ Gebrauchsanleitung

5.1 GROUPS OF DAYS

Mon - Sun (factory setting) / Mon - Fri / Sat - Sun.
If the system is divided into zones, each with its own Control Panel/Ambient Unit, each single zone must be individually set
on each device.

5.2 SINGLE DAYS

selected day, as indicated in the table at the end of this section.
501...506 for heating and 561...566
HEATING CIRCUIT PROGRAMMING EDIT PROCEDURE
C B
B and the
or "Single days") B
B
the "Groups of days" hourly programming (section GROUPS OF DAYS) or
DHW CIRCUIT PROGRAMMING EDIT PROCEDURE
The procedure for enabling hourly programming of the DHW is the same as the hourly programming for the heating circuit. The
only difference is the name of the menu
SUMMARY TABLE
GROUPS OF DAYS
Weekly interval
Mon-Sun
Mon-Fri
Sat-Sun
SINGLE DAYS
Daily interval
Mon-Tue-Wed-Thu-Fri-
Sat-Sun
To simplify programming existing programmes can be copied to other days of the week. The following procedure is used.
COPYING A PROGRAMME TO ANOTHER DAY
The parameter between brackets "( )" refers to hourly programming in DHW
514 (574)
Copy? appears on the display.
B Copy to
B
Repeat the above point to copy the same daily programme to other days.
C to return to the previous menu.
7219836.01 (1-04/15)
B
514 (Select default timings?)
On1 – Off1
On1 – Off1
501...506. The intervals are:
500 (Select days).
B and B to select one of the 3 pre-set programmes of
B
Preset programmes
On2 – Off2
Preset programmes
On2 – Off2
515 (575).
B
38
B to scroll the days ("Groups of days"
560 (Select days). To disable this
On3 – Off3
On3 – Off3
501 (561) (if manual