Initial Ignition - Special Functions; System Gas Extraction Function - Baxi luna platinum+ Gebrauchsanleitung

15. INITIAL IGNITION - SPECIAL FUNCTIONS

After this operation, the boiler is ready to ignite the burner.
Available functions are:
Controller stop function (304
facilitates gas valve calibration operations.
Manual control (301
Deaeration function (312) - Options: On (function enabled) - Off (function disabled). See section 15.1 "System gas extraction
function".
From the main menu
approx. 6 seconds)
B to choose the FUNCTION
chosen function then
B
E.g.: turn knob B to enable the CALIBRATION function
(programme row 304
and preset to 100% (the boiler is at its maximum thermal
percentage (0% corresponds to the reduced thermal power
To manually interrupt the function, repeat the procedure described above. When the function is disabled, " off" is shown on
the display.

15.1 SYSTEM GAS EXTRACTION FUNCTION

To manually interrupt the function, repeat the procedure described above. When the function is disabled, " off" is shown on
the display.
303
A and C
names of the FUNCTIONS (see
B to ENABLE the
B FUNCTION menu
303 304 301
49
312
7219836.01 (1-04/15)