2. ACCESS TO THE PARAMETER CONFIGURATION MENUS
a
Date: day, month, year
b
c
Pressure in boiler / heating circuit
d
Clock: hour and minutes
"Description of Symbols" section):
C
B to select the required menu;
Information (section 2.1)
Set time and date (section 2.2)
Operator unit (section 2.3)
Time central heating (1,2 - section 5)
Time central heating CH3 (section 5)
Time auxiliary
Holiday heating (1,2,3 - section 4.2)
Temps / mode (1,2,3 - section 4.1.1)
Instantaneous HW heater (not used for this type of boiler)
Error (section 7)
Diagnostics heat generation
2.1 INFORMATION MENU
To display boiler information, select " Information" as indicated in section 2.
Boiler temperature
Outside temp
Outside temp min
Outside temp max
DHW temperature
Manifold temperature
State boiler
Solar state
2.2 TIME AND DATE MENU
Access the Set time and date menu
B to edit the hour
B to edit 2 (Day / month) and 3 (Year) performing the same procedure as above.
C to return to the previous menu.
2.3 CHANGE LANGUAGE (Operator unit menu)
access the Operator unit menu
B to select a language
C to return to the previous menu.
B
Outside temp
DHW temperature (value read by the boiler DHW circuit probe)
(On/Off)
Heating circuit operating mode (circuits: 1,2,3)
Charging
DHW circuit operating mode
(On/Off)
Boiler operating mode
-
n
xxxxxxxxxx
B
1 (Hours / minutes)
B
B
B to save.
C to
B
B to edit
B
20 (Change language);
35
7219836.01 (1-04/15)