Temperature Adjustment; Functions Associated With The Easy Menu Button (Rapid Menu ); Operating Modes; Heating - Baxi luna platinum+ Gebrauchsanleitung

2.4 TEMPERATURE ADJUSTMENT

To adjust the temperature, turn knob B to the right
CENTRAL HEATING
The temperature to adjust can be:
if the Control Panel is installed on the boiler.
DOMESTC HOT WATER
set the request temperature value.
3.
FUNCTIONS ASSOCIATED WITH THE EASY MENU BUTTON (rapid menu
Press A and B
Standby/operation
Central heating mode CH1
Room temperature CH1
then B to enable the selected function,
Standby/operation
If this function is enabled,
freeze function remains enabled). To recover boiler operation, repeat the procedure described above.
This menu is used to select the boiler operating mode as indicated in section 4.
Room temperature CH1
Select this menu to change the comfort ambient temperature value.
Select this menu to enable "On" or disable "Off" DHW. The "Eco" function is not used on this model of boiler.
Select this menu to change the maximum DHW temperature value.

4. OPERATING MODES

4.1 HEATING

From the main menu
B
Turn knob B
On
Reduced
Timed: heating depends on the set time band (symbols displayed
Off: heating is disabled.
7219836.01 (1-04/15)
to increase and to the left
B to adjust the value and
appears on the display and boiler operation is disabled in the DHW and heating modes (the anti-
disappears from the display.
A B
On - Reduced - Timed - Off
to decrease than
B
B
B C
).
);
);
36
B
B to
)