Control Panel Block Function; Switching Off The Boiler; Faults; Resetting Faults - Baxi luna platinum+ Gebrauchsanleitung

RESETTING THE ORIGINAL PROGRAMMING (FACTORY SETTING)
C B
B by one position
B by one position until yes is displayed
C to return to the previous menu.

5.4 CONTROL PANEL BLOCK FUNCTION

BLOCK procedure
C B Operator unit
B
B On B to enable the block function.
RELEASE procedure
C A and B
This release phase is temporary
function, perform the temporary release procedure and then
B

6. SWITCHING OFF THE BOILER

7. FAULTS

A Main fault code (see table)
B Secondary fault code
C Description of fault
A fault code (A)
A secondary fault code (B);
A brief description of the fault (C);
THE BOILER "CONTROL PANEL".
In the event of a fault, to display the main menu,

7.1 RESETTING FAULTS

Faults can be reset AUTOMATICALLY, MANUALLY or by calling in the AUTHORISED TECHNICAL SERVICE CENTRE. The
AUTOMATIC
caused it is eliminated.
and/or is not automatically reset by the boiler, contact the Authorised Technical Service Centre.
MANUAL
B
516 (
B
27 (Programming lock)
C. The symbol
500 (Time central heating CH1) or 560
B
B
B to Off
remains on the display indicating that the appliance is
B B "Yes"
39
00-24 , equal for all the days
576 for DHW.
C.
".
27 (Programming lock) and
the boiler stays
B
7219836.01 (1-04/15)