Connection To A Solar Plant - Baxi luna platinum+ Gebrauchsanleitung

14.4 CONNECTION TO A SOLAR PLANT (

(for models 1.12 - 1.18 - 1.24 - 1.32)
The boiler can be connected to a solar plant.
KEY TO ELECTRICAL CONNECTIONS (see diagram B in annex "SECTION" F at the end of this manual).
1
Storage boiler probe for solar plant
2 Solar manifold probe
Solar plant storage boiler probe (1) to terminals 7-5 of boiler terminal block M2.
Probe (2) to terminals 6-5 of boiler terminal block M2;
Storage boiler probe (4) to terminals 9-10 of boiler terminal block M2 as described in section 14.5.2.
Connect the pump of the solar plant to terminals 6-7 of boiler terminal block M3
the end of this manual).
CONFIGURING PARAMETERS
Access menu 2 as described in section 14.2.1 (see key).
B
B
B
B
B31 then B
B
B6 then B
When the symbol
Access menu 2 as described in section 14.2.1.
B Solar B
choice, B to edit and
INSTALLATION OF VACUUM PANELS
Access menu 3 as described in section 14.2.1.
3830
3831 set 30 seconds (minimum time the solar pump must remain on).
3
Solar plant pump
4 Storage boiler probe
then B
5890 (Relay output QX1)
Collector pump Q5 then
5931 (Sensor input BX2, terminals 5-7 on terminal block M2)
5932 (Sensor input BX3, terminals 5-6 on terminal block M2)
appears on the display, it means that the solar plant pump is heating the storage boiler.
Solar menu to set the manifold overheating protection (parameter 3850 default
3810
B
B
30 minutes (solar pump start interval).
)
B.
B
3811
3810, 3811, 3850, 5055, 5057 then
47
B B
B B Collector sensor
B
7219836.01 (1-04/15)