Safety Information; General Information; B) Power Cable/Mains Voltage/Fuse - TOOLCRAFT ST-100HF Bedienungsanleitung

5. Safety information

Read the operating instructions and safety information carefully. If you do not follow the safety
instructions and information on proper handling in this manual, we will assume no liability for any
resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
a) General information
• The unauthorized conversion and/or modification of the product is prohibited for safety and approval
reasons. Never disassemble the product (apart from changing the soldering tip, replacing a defective
fuse or resetting the password as described in these operating instructions)!
• This device is not a toy. Keep it out of the reach of children and pets.
• This product is not intended to be used by people (including children) with impaired physical, sensory
or mental capabilities or lack of experience and/or lack of knowledge unless they are supervised by a
person responsible for their safety or have received instructions on how to use the product.
• Do not leave packaging material lying around carelessly, as it may become a dangerous toy for children
and presents a choking hazard.
• In schools, educational facilities, hobby and DIY workshops, the product must be operated under the
supervision of qualified personnel.
• Always comply with the accident prevention regulations for electrical equipment when using the product
in industrial facilities.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may damage the
product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.

b) Power cable/mains voltage/fuse

• This product is built according to protection class I. It must be powered by a standard earthed mains
socket.
• Before connecting the soldering station, make sure that the mains voltage in your region meets the
specifications on the name plate.
• The mains socket that you use to connect the power cable must be easily accessible.
• Do not pull the power plug from the mains socket by pulling on the cable.
30